KILL MOSQUITOES WITH YOUR COMPUTER

Stop using chemical based Insecticides to kill mosquitoes, because you might kill yourself.

Download these Anti Mosquito software to repel those annoying insects and be safer & greener


How does it work?
Dragonflies are the mortal enemy for mosquitoes and in flight they generate sound frequencies (approximately) between 67 Hz and 45 Hz, depending on their sizes.

56 Hz is a good average number in between those frequencies. Your PC sound card and speakers will work well for this purpose. There are many sound and tone generator programs available on the internet for both the Mac and Windows PC. Setup your computer with the sound/tone generator program running and then play the sound through your computer speakers. The speakers can be aimed directionally for complete room coverage.

The sound level on the speakers should be adjusted so it is barely audible. This arrangement can be setup in a bedroom where you would like to have the window open but are worried about mosquitoes. One speaker should be fairly close to where you are sleeping.

Here are some links to more advanced tone generator software which can actually sweep between the 45 Hz and 67 Hz frequencies:

http://www.nch.com.au/tonegen/index.html
http://www.esseraudiosolutions.com/ttg.htm

Making A file of the size you want

How to make a file of the size you want ?
Let us assume you want to make a file of size 10000kb
Convert it to bytes -> 10000*1024 which comes out to be 10240000 bytes

Open calculator (win key+r -> type in calc )
Choose view mode to be Scientific one
Type in 10240000 and convert it to hex it comes out to be 9C4000
Convert this value to 8 digits by padding zeroes to its left -> so finally it comes out be 009C4000

Open Command Prompt (win key + r -> type in cmd )
Type DEBUG filename.dat
it'll show file not found error ,ignore it
Type RCX -> Enter -> then last four hexadecimal numbers i.e. 4000 ->Enter
Type RBX -> Enter -> then first four hexadecimal numbers i.e. 009C->Enter
Type W ->Enter
Type Q ->Enter

W stands for write and Q for quit

Now check the file you just made by dir command ->dir filename.dat

Using the same technique you can make files as big as you want

Here is an image to show how exactly everything can be done




Another simpler method by Prash2488

try this command on cmd
fsutil file createnew [path]{e.g.:-F:new foldervirus.txt} [SizeInBytes]then press enter:

Making A file of the size you want

How to make a file of the size you want ?
Let us assume you want to make a file of size 10000kb
Convert it to bytes -> 10000*1024 which comes out to be 10240000 bytes

Open calculator (win key+r -> type in calc )
Choose view mode to be Scientific one
Type in 10240000 and convert it to hex it comes out to be 9C4000
Convert this value to 8 digits by padding zeroes to its left -> so finally it comes out be 009C4000

Open Command Prompt (win key + r -> type in cmd )
Type DEBUG filename.dat
it'll show file not found error ,ignore it
Type RCX -> Enter -> then last four hexadecimal numbers i.e. 4000 ->Enter
Type RBX -> Enter -> then first four hexadecimal numbers i.e. 009C->Enter
Type W ->Enter
Type Q ->Enter

W stands for write and Q for quit

Now check the file you just made by dir command ->dir filename.dat

Using the same technique you can make files as big as you want

Here is an image to show how exactly everything can be done




Another simpler method by Prash2488

try this command on cmd
fsutil file createnew [path]{e.g.:-F:new foldervirus.txt} [SizeInBytes]then press enter:

Making A file of the size you want

How to make a file of the size you want ?
Let us assume you want to make a file of size 10000kb
Convert it to bytes -> 10000*1024 which comes out to be 10240000 bytes

Open calculator (win key+r -> type in calc )
Choose view mode to be Scientific one
Type in 10240000 and convert it to hex it comes out to be 9C4000
Convert this value to 8 digits by padding zeroes to its left -> so finally it comes out be 009C4000

Open Command Prompt (win key + r -> type in cmd )
Type DEBUG filename.dat
it'll show file not found error ,ignore it
Type RCX -> Enter -> then last four hexadecimal numbers i.e. 4000 ->Enter
Type RBX -> Enter -> then first four hexadecimal numbers i.e. 009C->Enter
Type W ->Enter
Type Q ->Enter

W stands for write and Q for quit

Now check the file you just made by dir command ->dir filename.dat

Using the same technique you can make files as big as you want

Here is an image to show how exactly everything can be done




Another simpler method by Prash2488

try this command on cmd
fsutil file createnew [path]{e.g.:-F:new foldervirus.txt} [SizeInBytes]then press enter:

How to hide the files and folder from registry editor

How to hide the files and folder from registry editor

To hide the files and folder for ur privacy, they can be hidden from registry editor
> go to run & type "regedit"
> go to HKEY_LOCAL_MACHINE
> go to SOFTWARE
> go to Microsoft
> go to Windows
> go to CurrentVersion
> go to Explorer
> go to Advanced
> go to Folder
> go to Hidden
> go to SHOWALL
> then, doubleclick on the DefaultValue & in the Value data, change the value into 0 from 1
> then open the explorer n go to folder options
> after that, switch on the do not show hidden files and folder check box
> by doing like that, ur files n folders (those file/folder must b hide earlier) are hidden even if u switch on the show hidden files and folder check box
> to show those hidden files n folders, in the regedit, just change this value into 1

How To Change a Windows XP Limited User Account Into a Admin acc

How To Change a Windows XP Limited User Account Into a Admin acc

School Hacking ( How to unblock websites )

Ok, so first you will need to know how to access MS-DOS. There are several ways to do this, The next paragraph will be about creating the prompt:

Creating MS-DOS at school ................................!!!

Go into notepad and type "command.com", (without quotes) then save it as (.bat) , like xyz.bat . Once you've done this you should get an icon, click on it and MS-DOS should open. Congratulations youve created the Command Prompt and are ready to start hacking.
There are many commands for MS-DOS .

How to unblock websites !!!!

Almost everybody wants to know how to unblock websites so im going to tell you a few strategies. Ok Lets say you wanted to go on www.youtube.com but your stupid school blocks it, well here is how to bypass it.

1.Open up Command Prompt (Explained Above) Type Exactly this:

"Ping(Space)www.youtube.com " without the quotes of course

It should then say pinging youtube.com and will give you a number that should look abit like this. 208.65.153.251

Ok now,

This number is your key, go to your web address bar type in

http://208.65.153.251

You will now be running youtube on the school / work computer through Youtubes
IP Address.

2. Use a proxy server/unblock site such as www.instantunblock.com or www.ultimateunblock.com Or www.proxify.com
That's just three there are many more:)

3. Go to http://www.google.com.au and click on "Language Tools"

Now in the space where you can translate webpages type the desired website

Click "German to English" then click translate, So basically the website is already in english so it cant be translated.

When you search for the Website at school on google, Below the link to the website should be a little link saying "Cached" Click that and you should be in.

Thanks , That's all on unblocking websites !!!

Some Tips to make Firefox Faster

Guys Here is some Tips to make Firefox faster. This will help to load faster specially slow connections and UL BB users who is getting speed of 256/kbps. i had tried and using this. i got this from various sites.

1. Type about:config into the Firefox URL/address bar and hit ENTER. You will be warned that you might void your warranty if you change some advanced settings, but just go on and trust me :-)

2. Inside the Firefox configuration page, scroll down and look for the following entries:

network.http.pipelining and network.http.proxy.pipelining -->Set their values to “true” by double-clicking each one of them.

3. Next up, find this entry: network.http.pipelining.maxrequests -->Double-click and set the value to 30.

4. Right-click anywhere inside the config page and select New --> Integer. Name it nglayout.initialpaint.delay and set the value to “0″.

5. Right-click anywhere inside the config page and select New --> Integer. Name it content.notify.interval and set the value to “500000″.

6. Right-click anywhere inside the config page and select New --> Boolean. Name it content.notify.ontimer and set the value to “true″.

7. Right-click anywhere inside the config page and select New --> Integer. Name it content.switch.threshold and set the value to “250000″.

8. Right-click anywhere inside the config page and select New --> Boolean. Name it content.interrupt.parsing and set the value to “false″.

9. Look for “network.http.keep-alive”. If it’s false, double-click that line and to change it to true.

10. Make sure “network.http.version” is set to “1.1″.

11. right-click anywhere in the window and select New > Integer. Type browser.cache.memory.capacity, click OK, enter 65536 and click OK,